Side by side with ZX11
KZ 64mm, Busa 68mm, ZX 11 74mm,
A closer inspection of the bottom crankcase.
This view gives a good idea of the rigidity of the new cases.
This is a good angle to see the cylinder / upper engine case. Rigidity is far superiour to a cylinder that is removable.
2 38mm intake and 2 28 mm exhaust valves feed the largest 4 cylinder Kawasaki streetbike
Adams 2" low profile oil pan
Oil filter relocator
The new and the newer
Staggered transmission shafts allow for wider shaft centers without the motor taking up more space in the chassis
Input shaft is lower, slides into the cases through the hole. Bearing sits in collar that bolts into the cases.
Planned for this bike include the bearing carrier also locates on bolt pattern that surrounds the output shaft. Transmission cover will then tie into the chassis.
ZRX, ZZR 1200, Hyabusa and ZX12 with a seperate cylinder assembly have the upper engine cast without material around the bottom of the sleeves to accomdate the larger bores
Completly baffeled with pickup and 5 quart capacity.
information at www.adamsperformance.net
Keep the oil filter in original location or mount at another spot where accesable.
Scroll at arrows for more pictures
| TECH TALK |
FOR SALE |